Our SoundCheck tutorials are a comprehensive video guide to the basics of SoundCheck operation. It encompasses much of the content from our scheduled training classes, packaged into over 60 videos around 5-10 minutes each, for convenient, anytime learning. The series begins with hardware setup and calibration, progressing through sequence writing, analysis, display and more complex topics such as custom VIs. The videos are ordered to form a logical progression from one topic to the next for new users, but also serve as a useful reference guide for more experienced users looking to upgrade their knowledge.
There are 2 ways you can view these:
1) On YouTube - a complete sequential playlist covering everything in order - great for new users.
2) Here, using the list below (useful for honing in on specific subjects, or if you are located in a country that restricts YouTube access)
Note that the content is identical.
SoundCheck Tutorials on YouTube - Complete Playlist (recommended)
Index of Topics (with links to local copy):
1. Hardware Setup
1-1 – Listen Hardware
1-2 – 3rd Party Hardware
1-3 – Hardware Calibration
1-4 – External Hardware
2. Calibration
2-1 - SoundCheck Calibration Basics
2-2 - Advanced System Calibration
2-3 - Saved Calibration Data
2-4 - Reference Microphone Calibration
2-5 - Amplifier Calibration
2-6 - Speaker Equalization
2-7 - Calibrated Device Parameters
3. Stimulus
3-1 - SoundCheck Stimulus Basics
3-2 - Advanced functions of the Stimulus Editor
3-3 - Frequency Stepped Sweep (Stweep)
3-4 - Frequency Log Sweep Stimulus
3-5 - Amplitude Log Sweep Stimulus
3-6 - Wav file Stimulus
3-7 - Two-tone Stimulus
3-8 - Noise Stimulus
3-9 - Multitone Stimulus
4. Acquisition
4-1 - Play and Record
4-2 - Record Only
4-3 - Virtual Instruments
5. Analysis
5-1 - Analysis Basics
5-2 - Waveform Analyses
5-3 - Curves
5-4 - Time and Delay Analyses
5-5 - Loose Particle Analysis
6. Message Steps
6-1 - Operator Message steps
6-2 - External control messages
6-3 - Listen Hardware Control messages
7. Sequence Loops and Logic
7-1 - The Basics
7-2 - Loop Stimulus Level
7-3 - Polar Plot Measurements
7-4 - Jump To Sections
7-5 - Digital I/O
8. Autosave
8-1 - The Basics
8-2 - Autosave to Database
8-3 - Autosave to Excel
8-4 - Autosave to Matlab
8-5 - Autosave to Text
8-6 - Autosave to Wave
9. Recall
9-1 - The Basics
9-2 - Recalling Text Files
9-3 - Recalling Wave Files
10. Limits
10-1 - The Basics
10-2 - Data
10-3 - Advanced
11. Statistics
11-1 - Data
11-2 - Results
11-3 - Process Capability
11-4 - Offline
12. Display
12-1 - Display Step Basics
12-2 - Display Configuration
12-3 - Graph Palettes
12-4 - X-Y and Waveform Graphs
12-5 - Tables, Text and Pictures
12-6 - Results
12-7 - Polar Plot
13. Creating and Using Custom Vis
13-1 - Creating and using Custom VIs (V 16+)
13-2 - Creating and using Custom VIs (V 15)
Comments