Using SoundMap to Analyze Loose Particle Waveforms

The SoundMap™ Time Frequency Analysis module enables detailed analysis of signals simultaneously in both the time and frequency domain.
It is ideal for impulse response analysis and detection of loose particles and Rub & Buzz in loudspeakers. It is also valuable for identification of transient effects such as drop out in digital devices including VoIP and Bluetooth headsets.

This example shows how to analyze the Loose Particle waveform taken using one of the stock sequences included with SoundCheck.

Note that SoundMap is an optional module that must be enabled for your hardware key.



More information on SoundMap


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk