Making Measurements
- ★ How Do I Test the Microphone on My Smartphone, Tablet or Other Portable Device?
- When measuring the Phase of a Microphone Array, how should I configure Auto Delay in Analysis?
- Create Limits from Curve Averages
- Change Signal Generator Values with Arrow Keys
- Why are Stweep Stimuli performed from high frequencies to low frequencies?
- Why Does My Sequence Give a “Waveform Is Empty” Error?
- Copy DB Ref with a Single Click
- Why do I get a "No Signal Detected" error when running Speaker Equalization calibration?
- Adjusting the Signal Generator in 1/24 Octave
- Using Batch Processing with Analysis and Post-Processing
- Impedance Measurement Guidelines: Optimizing Single Channel Impedance Measurements for Resolution and Repeatability
- How Can I Optimize My Stweep Parameters?
- How Can I Detect an Air Leak Using SoundCheck?
- Can SoundCheck be Externally Controlled Using a Python Script?
- Can I Measure DC Voltage With SoundCheck?
- When measuring microphones, does the Z axis (phase) data take into account the time delay due to speed of sound and distance?
- How Can I Test the Polarity of My Device?
- How Can I Measure Impedance in SoundCheck?
- How Do I Test the Speaker/Headphone out on My Smartphone or Other Portable Device?
- Can I Control the Windows Mixer From SoundCheck?
- How Do I Change Units In SoundCheck?
- How Do I Control SoundCheck Externally With Another Program?
- How Do I Measure the THD of a Single Harmonic?
- Why Does My Externally Polarized Microphone Have a Negative Polarity?
- Can I Use the Outline ET Turntables With Soundcheck?
- How Can I Listen to What SoundCheck is Recording?
- Can I Use the B&K 9640 Turntable System With Soundcheck?
- Is There a Way of Routing Signals to a VoiP Phone So That I Can Communicate With the Device Under Test via a Softphone Interface in SoundCheck?
- Is There a Way to Simultaneously Start and Stop Multiple Signal Generators in Offline Mode?